Genique Medcrop Private Limited

The Dräger Fabius Tiro is a compact anesthesia workstation used in operating rooms to deliver inhalational anesthesia and provide mechanical ventilation for patients (adult, pediatric, and neonatal). Below are the main specifications and technical details.

1. General Specifications

• Type: Anesthesia machine with integrated ventilator

• Manufacturer: Dräger

• Patient types: Adult, Pediatric, Neonatal

• Ventilator type: Electrically driven piston ventilator (E-Vent)

• Use areas: Operating room, emergency room, recovery room, procedure rooms

2. Dimensions & Weight

• Cart version (with breathing system):

  • Width: ~77.2 cm

  • Height: ~136.1 cm

  • Depth: ~83.8 cm

• Wall/ceiling version:

  • Width: ~72.1 cm

  • Height: ~55.6 cm

  • Depth: ~77.5 cm

• Weight:

  • Cart version: ~116 kg

  • Wall mount: ~48 kg

3. Power Supply

• Input voltage: 100–240 VAC

• Frequency: 50/60 Hz

• Power consumption: ~70 VA

• Battery backup: Minimum 45 minutes (up to ~120 minutes)

4. Ventilation Modes

• Manual / Spontaneous

• Volume Control Ventilation (VCV)

• Pressure Control Ventilation (PCV)

• Pressure Support (PS)

• SIMV with Pressure Support (SIMV/PS)

5. Ventilator Parameters

• Tidal Volume (VT):

  • 20 – 1400 mL (VC mode)

• Respiratory Rate: 4 – 60 breaths/min

• PEEP: 0 – 20 cmH₂O

• Inspiratory Pressure: (PEEP +5) to 65 cmH₂O

• Inspiratory Flow: 10 – 75 L/min

• I:E Ratio: 4:1 to 1:4

6. Gas Supply System

• Supported gases:

  • Oxygen (O₂)

  • Nitrous Oxide (N₂O)

  • Medical Air

• Fresh gas flow indicator: 0 – 12 L/min

• Total flowmeter: 0 – 10 L/min

• O₂ flush:

  • Max ~75 L/min at 6 bar pressure

7. Safety Features

• Minimum 23% oxygen concentration control

• Automatic N₂O cut-off if O₂ supply stops

• Audible and visual alarms for low O₂ pressure

• Positive pressure relief valve

• Manual ventilation possible during power failure

8. Monitoring Parameters

The machine can monitor:

• Inspired O₂ concentration

• Airway pressure (Pmax, PEEP, mean pressure)

• Respiratory rate

• Tidal volume

• Minute ventilation

• Gas flow display

✅ Key Features

• Compact design (ideal for small ORs)

• Electrically driven piston ventilator (no drive gas required)

• Modular design with optional monitors and vaporizers

• High-contrast display and intuitive interface

 

The Dräger Fabius Plus Anesthesia Workstation is a modular anesthesia delivery system used in operating rooms for administering anesthetic gases and providing controlled ventilation. Below are the main technical specifications typically used in hospital tenders or biomedical documentation.

Dräger Fabius Plus Anesthesia Workstation – Specifications 1. General Information

• Manufacturer: Dräger

• Model: Fabius Plus

• Type: Anesthesia Workstation

• Application: Delivery of anesthetic gases and mechanical ventilation during surgery

• Patient Categories: Adult, Pediatric, Neonatal

2. Physical Specifications

• Dimensions (Trolley Version): 91 × 140 × 77 cm

• Dimensions (Wall/Ceiling Version): 85 × 73 × 50 cm

• Weight:

  • Trolley version: ~110 kg

  • Wall/Ceiling mount: ~69 kg

3. Power Supply

• Input Power: 100–240 V AC

• Frequency: 50/60 Hz

• Power Consumption: ~70 VA

• Battery Backup: 45–120 minutes (approx.)

4. Gas Supply System

• Supported Gases:

  • Oxygen (O₂)

  • Nitrous Oxide (N₂O)

  • Medical Air

• Fresh Gas Flow Range: 0 – 12 L/min

• O₂ Flush Flow: Up to 75 L/min

• Vaporizer Mount: Up to 2 vaporizers (Dräger or Selectatec)

5. Ventilator System

Ventilator Type: E-vent electronically controlled piston ventilator

Ventilation Modes

• Manual / Spontaneous

• Volume Control (VC)

• Pressure Control (PC)

• Pressure Support (PS)

• SIMV / PS

6. Ventilator Parameters 7. Display and Interface

• 10.4 inch TFT color display

• Day/Night display modes

• Rotary knob and menu-based control

• Clear monitoring of ventilation parameters

8. Breathing System

• Integrated breathing circuit

• CO₂ absorber capacity:

  • 1.5 L reusable

  • 1.2 L disposable CLIC system

• Respiratory system volume: ~1.7 L

The Dräger Fabius GS is a compact anesthesia workstation used in operating rooms for delivering anesthetic gases and providing mechanical ventilation.

Below are the main specifications.

1. General Specifications

• Type: Anesthesia machine with integrated ventilator

• Ventilator: E-Vent (electronically controlled piston ventilator)

• Patient Types: Adult and Pediatric

• Breathing system: Compact breathing system (COSY)

2. Dimensions & Weight 3. Power Supply 4. Ventilation Modes

• Manual / Spontaneous

• Volume Control Ventilation (VCV)

• Pressure Control Ventilation (PCV)

• Pressure Support (PS)

• SIMV with Pressure Support (SIMV/PS)

5. Ventilator Parameters 6. Gas System

• Gases:

  • Oxygen (O₂)

  • Nitrous Oxide (N₂O)

  • Medical Air

• Fresh gas flow indicator: 0–12 L/min

• Total fresh gas flowmeter: 0–10 L/min

• O₂ flush: up to 75 L/min

7. Safety Features

• Sensitive Oxygen Ratio Controller (S-ORC) ensures minimum 23% O₂ concentration

• Automatic N₂O cut-off if O₂ supply fails

• Audible and visual low-oxygen alarms

• Manual ventilation possible during power failure

✅ Short Summary (Exam Format)