Genique Medcrop Private Limited

The ERBE ICC 300 is a high-frequency electrosurgical generator used in operating rooms for tissue cutting and coagulation during surgery.

Below are the main specifications.

1. General Specifications

• Type: Electrosurgical Unit (ESU)

• Technology: High-frequency surgery generator

• Applications: General surgery, laparoscopy, endoscopy, and other surgical procedures

• Operating Modes:

  • Monopolar cutting & coagulation

  • Bipolar coagulation

2. Output Power 3. Surgical ModesCutting Modes

• Pure Cut

• Blend Cut

• High Cut

Coagulation Modes

• Soft Coagulation

• Forced Coagulation

• Spray Coagulation

• Bipolar Coagulation

4. Electrical Specifications 5. Dimensions & Weight 6. Display & Controls

• Display: LED indicator display

• Controls: Push-button power adjustment

• HF power adjustment: 1–300 W in small increments

7. Safety Features

• Neutral Electrode Safety System (NESSY)

• Automatic self-test

• Overload protection

• Ground fault protection

✅ Short Summary (Exam Format)

 

Introducing the VIO300S Electrosurgical Unit by Erbe, a cutting-edge device designed to elevate your surgical precision and efficiency. This versatile unit offers a range of advanced features, including a user-friendly interface and customizable settings that cater to various surgical procedures. With its innovative technology, the VIO300S ensures optimal tissue cutting and coagulation, minimizing thermal damage and promoting faster recovery times for patients. The compact design makes it easy to integrate into any surgical environment, while the robust safety features provide peace of mind for both surgeons and patients alike. Experience the perfect blend of reliability and performance with the VIO300S, and take your surgical practice to the next level

Refurbished Covidien ValleyLab Force Triad Electrosurgical Unit :

Make : Covidien
Model :  ValleyLab Force Triad Electrosurgical Unit

Specifications :

• Modes Supported : Monopolar, Bipolar
• Type of Equipment : Combo of Cautery & Ligasure
• Weight : 13.6 Kg
• Dimensions : 45.7*50.8*25.4cm
• Operating Frequencies : 300kHz to 500kHz
• Input Voltage: 100–240 V AC
• Frequency: 50/60 Hz
• Power Consumption: Typically around 500 VA

Features :

• Permanently seals vessels up to 7 mm
  
• Offers a unique blend of monopolar hemostasis and dissection.
• Simplifies setup and ensures compatibility.
• User-friendly design for quick adjustments and reduced staff workload.
• Enhances patient safety by monitoring return electrode contact.

Requirement Type : Refurbished

Prices are Negotiable.*

G‑MED ESU‑400 CAUTRY(commonly called an electrocautery / diathermy machine). It is used in operating rooms to cut tissue and control bleeding using high-frequency electrical energy.

Below are the main specifications and features based on ESU-400 type systems and what is visible on the front panel.

1. Basic Information

• Device name: G-MED ESU-400

• Type: Electrosurgical Generator / Electrocautery Machine

• Application: Surgical cutting and coagulation

• Use areas:

  • General surgery

  • Gynecology

  • Urology

  • ENT surgery

  • Laparoscopic procedures

2. Output Power

• Maximum power output: up to 400 W

• Monopolar cutting power: up to 300–400 W

• Coagulation power: about 70–120 W depending on mode

3. Operating Modes

From the panel in the image:

CUT Section (Yellow)

• Pure Cut

• Blend 1

• Blend 2

COAG Section (Blue)

• Standard Coagulation

• Spray Coagulation

BIPOLAR Section

• Bipolar Cut

• Bipolar Coag

These allow surgeons to select different tissue effects (cutting or sealing blood vessels).

4. Frequency

• High-frequency output: about 400–500 kHz RF energy used for tissue cutting/coagulation.

5. Electrical Requirements

• Input voltage: 100–240 V AC

• Frequency: 50 / 60 Hz

• Input power: approx. 1000 VA

6. Control System

• Digital power display (LED)

• Up/Down power adjustment buttons

• Hand switch or foot switch activation

• Three-zone control system (Cut / Coag / Bipolar)

7. Safety Features

• Return electrode monitoring (patient plate monitoring)

• Error alarm system

• Automatic power shutdown

• Defibrillator protection

• Audible and visual alarms

8. Front Panel Connections (visible in image)

• Power switch

• CUT/COAG handpiece connector

• Neutral (patient plate) connector

• Bipolar forceps connector

• Footswitch port

✅ In simple terms:
This machine produces controlled high-frequency electrical energy to cut tissue and stop bleeding during surgery.